RIIMPO321F (Front End Loader) – VOC – Student AT2 – Practical Observation Step 1 of 9 11% STUDENT ASSESSMENT TASK 2 - VOC PRACTICAL OBSERVATIONAL ASSESSMENT (UOC RELEASE 3 - ALIGNED TO RIIMPO321F)🖋️ COURSE ASSESSOR TO COMPLETE THIS SECTIONPurpose of this VOC: This Verification of Competence (VOC) is designed to confirm that existing employees who operate wheeled front end loaders are: Currently competent in the safe operation of the equipment. Possess up-to-date theoretical knowledge relevant to workplace SOP and workplace health and safety requirements. Can demonstrate practical operational competence through direct observation. This VOC: Does not constitute training and does not result in the issue of a unit of competence. This VOC assessment is conducted for workplace assurance, governance, and workplace health and safety purposes. Scope: This VOC applies to workplace employees, operators with prior training, tickets, or demonstrated workplace experience using wheeled front end loaders in civil construction and/or workplace maintenance activities. Pre-Assessment Requirements: Prior to undertaking this VOC, the participant must Provide evidence of previous training, qualifications, or work experience. Hold current workplace site inductions. Confirm that they are medically fit to operate the plant. Hold any relevant licences required by workplace policy and procedures. Version: 2026.1 Revision # 1 UOC Release 3 Release Date 05/02/2026 Document Type Assessment Warning – Uncontrolled when printed! The current version of this document is kept on the ITS serversSUBJECT: RIIMPO321F Conduct civil construction wheeled front end loader operations GENERAL ASSESSOR INSTRUCTIONS Please review the General Assessor Instructions for conducting assessment with Intelligent Training Solutions before commencing with the administration of this assessment. LINK: https://staff.its.edu.au/?epkb_post_type_1=general-assessor-instructions Assessment Duration: The practical assessment must be conducted through direct observation in a workplace or approved simulated environment. The total observation time should not exceed one (1) hour. Observation may occur in staged segments depending on site operations; however, all required criteria must be observed and recorded. Assessor Details (Full Name)(Required) Dr.MissMr.Mrs.Ms.Mx.Prof.Rev. Prefix First Last MobileEmail (Business) STUDENT DETAILSPLEASE PROVIDE US WITH THE STUDENT'S DETAILS HEREStudent's Full Name Dr.MissMr.Mrs.Ms.Mx.Prof.Rev. Prefix First Last Student Mobile Number(Required)Student Email Address Worksite / Location(Required)Equipment Type / Model:(Required) PART 1) Planning & preparing for front-end loader operations.IMPORTANT NOTE: If the student is unable to successfully demonstrate the requirements listed below in Part 1, they are not to proceed with this assessment! Please state whether you have observed the student perform the following to an acceptable level or standard within your organisation. Does this student consistently:Correctly accesses and interprets work instructions, drawings, and job requirements.(Required) YES NO Identifies site-specific hazards (ground conditions, personnel, services, traffic, environmental conditions).(Required) YES NO Applies appropriate risk controls in line with workplace procedures.(Required) YES NO Selects, inspects, and correctly wears required PPE.(Required) YES NO Implements traffic management measures relevant to the task.(Required) YES NO Explains emergency procedures and response requirements for both the intended work task and plant equipment.(Required) YES NO Communicates planned activities clearly with relevant personnel on-site.(Required) YES NO Select the appropriate plant equipment and confirm it suitability for work activities?(Required) YES NO Can the student’s hair, clothing, PPE become entangled with moving parts of the plant?(Required) YES NO Employer/Manager/Supervisor's Notes & Observations PART 2) Pre-Start inspection and machine preparationDid this student consistently:Conduct a systematic pre-start inspection in accordance with manufacturer and site requirements.(Required) YES NO NOTE: This generally includes a 360 degree walk-around inspection. Checks fluid levels, tyres, attachments, controls, and safety systems in accordance with the organisations SOP.(Required) YES NO Identify faults or defects accurately(Required) YES NO Correctly report faults and isolates equipment where required(Required) YES NO Completes pre-start documentation accurately and legibly in accordance with the organisations SOP.(Required) YES NO Demonstrate that they can mount and dismount the equipment safely.(Required) YES NO Employer/Manager/Supervisor's Notes & Observations PART 3) Safe operation of front-end loaderRecord the type of activity performed by the studentWork Activity 1(Required)Loading trucksLoading trailersStockpile loadingHopper loadingBatch plant loadingBuilding stockpilesShaping stockpilesSeparating materialsBlending materialsRehandling materials within siteStripping topsoilSite clean-upLight excavationBackfillingSpreading fillSite levellingSpreading road baseShoulder maintenanceBatter shapingDrainage backfillingPavement preparationHauling material short distancesRelocating material between work zonesFeeding crushing/screening plantOtherOther 1(Required)Work Activity 2(Required)Loading trucksLoading trailersStockpile loadingHopper loadingBatch plant loadingBuilding stockpilesShaping stockpilesSeparating materialsBlending materialsRehandling materials within siteStripping topsoilSite clean-upLight excavationBackfillingSpreading fillSite levellingSpreading road baseShoulder maintenanceBatter shapingDrainage backfillingPavement preparationHauling material short distancesRelocating material between work zonesFeeding crushing/screening plantOtherOther 2(Required)Work Activity 3(Required)Loading trucksLoading trailersStockpile loadingHopper loadingBatch plant loadingBuilding stockpilesShaping stockpilesSeparating materialsBlending materialsRehandling materials within siteStripping topsoilSite clean-upLight excavationBackfillingSpreading fillSite levellingSpreading road baseShoulder maintenanceBatter shapingDrainage backfillingPavement preparationHauling material short distancesRelocating material between work zonesFeeding crushing/screening plantOtherOther 3(Required)Assessor Instruction: If the candidate does not satisfactorily demonstrate any of the performance criteria listed below at any time during the completion of the assigned work tasks for this VOC assessment, the assessor must record the outcome for that criterion as ‘NO’ or ‘NYS (Not Yet Satisfactory)’. A single instance of unsafe practice, incorrect procedure, or failure to meet workplace or unit requirements is sufficient to record the criterion as Not Yet Satisfactory, regardless of performance at other times during the assessment. Mounts and dismounts equipment using three points of contact.(Required) YES NO Covers: Work Activities 1, 2, and 3Operates controls smoothly and deliberately.(Required) YES NO Covers: Work Activities 1, 2, and 3Maintains awareness of exclusion zones and personnel.(Required) YES NO Covers: Work Activities 1, 2, and 3Adjusts operating techniques to suit ground and site conditions.(Required) YES NO Covers: Work Activities 1, 2, and 3Operates within machine rated capacity at all times.(Required) YES NO Covers: Work Activities 1, 2, and 3Demonstrates effective hazard monitoring during operations | situational awareness.(Required) YES NO Covers: Work Activities 1, 2, and 3Responds appropriately to alarms, gauges, and indicators.(Required) YES NO Covers: Work Activities 1, 2, and 3Photo Drop files here or Select files Max. file size: 64 MB. Please upload a photo of the student performing a work activity in the front end loader during this VOC assessment.Employer/Manager/Supervisor's Notes & Observations PART 4) Load handling and material movementDid this student consistently:Correctly estimates and confirms load weight prior to lifting.(Required) YES NO Selects appropriate bucket/attachment for task.(Required) YES NO Demonstrates stable loading techniques.(Required) YES NO Safely lifts, carries, and places materials without spillage or instability.(Required) YES NO Demonstrates at least two different material types (e.g. soil, gravel, aggregate).(Required) YES NO Performs at least two work tasks (e.g. loading, spreading, backfilling, mixing).(Required) YES NO Uses clear hand, audible, or radio communication signals as required.(Required) YES NO Works efficiently without rushing.(Required) YES NO Employer/Manager/Supervisor's Notes & Observations PART 5) Relocation, shutdown, and housekeeping.Did this student consistently:Prepares machine correctly for relocation.(Required) YES NO Moves loader safely within or between work areas in accordance with traffic management requirements.(Required) YES NO Assists with loading/unloading from float or trailer where applicable (under direction).(Required) YES NO Parks equipment on stable ground in designated area.(Required) YES NO Lowers attachments.(Required) YES NO Shuts down and secures equipment according to procedures.(Required) YES NO Conducts post-operational inspection and identifies any issues.(Required) YES NO Cleans work area and manages waste or recyclable materials correctly.(Required) YES NO Completes operational and workplace documentation accurately.(Required) YES NO Employer/Manager/Supervisor's Notes & Observations STUDENT DECLARATIONSTUDENT DECLARATION(Required) I declare that the information collected in this VOC Assessment Task is accurate and is a true reflection of my skills.Student SignatureYour NameYour NameYour NameYour Name COURSE ASSESSOR TO SIGN THIS SECTION!Assessor Declaration(Required) I agree to the following statements.Assessor Requirements: The assessor must: - Hold RIIMPO321F or equivalent – Have current industry experience operating a front end loader and be authorised by the client or Intelligent Training Solutions. I (THE ASSESSOR LISTED ABOVE), hereby declare that: I have observed the above-named student perform the tasks and activities outlined in this VOC assessment aligned to the unit RIIMPO321F – Conduct civil construction wheeled front end loader operations. To the best of my knowledge, the student has demonstrated the required competence in a workplace setting, and my feedback is an honest and truthful account of their performance. I understand that report will be used as evidence for the employer/client.Assessment Decision To be deemed competent, the participant must achieve: - Satisfactory outcomes in both theory and practical components. If gaps are identified: - The outcome will be Not Yet Competent – Targeted retraining and reassessment will be recommended. VOC Valid Until: 2 Years from Date of Assessment. NOTE: Industry Practice for VOC Frequency is every 2 years. Other reasons for VOC assessment, regardless of time or qualifications held, include: ✔ Prior to site start mobilisations. ✔ After extended absence from equipment. ✔ Following an incident or near miss.Assessment Task 1 (Theory) Result(Required) Satisfactory Not Satisfactory Not Yet Checked Assessment Task 2 (Practical) Result(Required) Satisfactory Not Satisfactory Is a re-assessment or resubmission required(Required) YES NO Resubmission / Re-Assessment Notes(Required)Assessor SignatureYour NameYour NameYour NameYour Name
